Table of Contents
Advertisement
Playing External Audio Devices with the Tyros5
You can connect the output jacks of an external device (such as CD player, portable audio
player, tone generator etc.) to the instrument's AUX IN [L/L+R]/[R] jacks, letting you
hear the sound of that device through the headphones or the optional Yamaha TRS-MS05
speakers of the Tyros5.
Phone plug
(standard)
Connecting an External Monitor ([RGB OUT] terminal)
By connecting an external monitor to the [RGB OUT] terminal of the instrument, you can
have the lyrics, text and display of the instrument's LCD shown on the monitor.
Mini D-Sub 15-pin
Selecting display contents for the external monitor
To do this, call up the display via [FUNCTION] [H] (UTILITY) TAB [][] CON-
FIG 2 [A]/[B] "1 SCREEN CONTENT," then use the [5 ]/[6 ] button. When
you select "LYRICS/TEXT," the connected monitor shows the LYRICS or TEXT display
regardless of what is shown on the instrument's LCD. When you select "LCD," the moni-
tor shows the same contents as shown on the instrument's LCD.
CD player, portable audio player,
tone generator
LINE OUT
Audio cable
NOTICE
To avoid damage to the devices,
first turn on the power to the
external device, then to the
instrument. When turning off the
power, first turn off the power to
the instrument, then to the exter-
nal device.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
NOTE
The input signal from the AUX IN jacks
is affected by the setting of the instru-
ment's [MASTER VOLUME] dial, and
the volume balance with other parts
such as entire keyboard can be adjusted
by the BALANCE display (page 61).
NOTE
If the display is not aligned properly in
the computer monitor, change the set-
tings on the monitor itself.
CAUTION
Avoid looking at the monitor for
prolonged periods of time since
doing so could damage your eye-
sight. Take frequent breaks and
focus your eyes on distant objects
to avoid eyestrain.
Tyros5 Owner's Manual
11
99
Advertisement
Table of Contents
