Yamaha Tyros5-76 Owner's Manual page 90

6
Follow the steps below, depending on which Type (and mode)
you selected.
If you selected one of the Chordal Types:
6-1
Turn the [ACMP] button on.
6-2
Play chords with your left hand, or play back the Song which contains chord
data.
Vocal harmonies based on the chords are applied to your singing.
If you selected one of the Vocoder or Vocoder-Mono Types:
6-1 Call up the SETUP window in the display by pressing the [8 ] button.
6-2 Use the [4 ]/[5 ] buttons to change the Keyboard setting (OFF,
UPPER, LOWER), if necessary.
When UPPER or LOWER is selected, playing the right-hand or left-hand
section of the keyboard will control the Vocoder effect. When OFF is
selected, playing the keyboard will not control the Vocoder effect. For more
information on the Keyboard setting to control the Vocoder effect, refer to
the Reference manual on the website.
6-3
Play melodies on the keyboard or play back a Song, and sing into the micro-
phone.
You'll notice that you don't actually have to sing pitched notes. Your vocal
sound (words, consonants, vowels, etc.) is grafted onto the notes or single
lines you play on the keyboard or the notes of Song playback.
Using the Talk Function
Turning the Talk function on by pressing the [TALK] button lets you instantly change the microphone settings for talk-
ing. This is useful when you want to make announcements between song performances.
You can also adjust the Talk settings to suit your preferences. For details, refer to the Reference Manual on the website.
90
Tyros5 Owner's Manual
6-1
NOTE
If you selected a Type having an "FX"
icon, your voice will be processed with
effects, but may not have harmonies
applied.
6-2
NOTE
For Vocoder Types, the effect is applied
to a maximum of three notes of the
chord you play; for Vocoder-Mono, the
effect is only applied to single notes
(last note played).