Calling Up Appropriate Panel Settings For The Current Style (One Touch Setting) - Yamaha Tyros5-76 Owner's Manual

Calling up Appropriate Panel Settings for the Current Style (One Touch
Setting)
One Touch Setting is a powerful and convenient feature that automatically calls up the
most appropriate panel settings (Voices and effects, etc.) for the currently selected Style,
with the touch of a single button. If you've already decided which Style you wish to use,
you can have One Touch Setting automatically select the appropriate Voice for you.
1
Select a Style (steps 1–2 on page 51).
2
Press one of the ONE TOUCH SETTING [1]–[4] buttons.
Not only does this instantly call up all the settings (Voices, effects, etc.) that match the current Style, it also auto-
matically turns on ACMP and SYNC START, so that you can immediately start playing the Style.
Confirming the One Touch Setting contents
In the Style Selection display, press the [6 ] (OTS INFO) button to call up the Information window that
shows what Voices are assigned to the ONE TOUCH SETTING [1]–[4] buttons for the current Style.
NOTE
Gray color for a Voice name in the window indicates that the corresponding Voice part is currently turned off.
To close the window, press the [F] (CLOSE) button.
3
As soon as you play a chord with your left hand, the selected
Style starts.
Each Style has four One Touch Setting setups. Press the other ONE TOUCH SET-
TING [1]–[4] buttons to try out other setups.
Automatically changing One Touch Settings with the Main sections
The convenient OTS (One Touch Setting) Link function lets you automatically
have One Touch Settings change when you select a different Main section (A–
D). The Main sections A, B, C and D correspond to One Touch Settings 1, 2, 3
and 4 respectively. To use the OTS Link function, turn the [OTS LINK] button
on.
NOTE
You can change the timing in which the One Touch Settings change with MAIN VARIATION [A]–[D] change. For
instructions, refer to the Reference Manual on the website.
56
Tyros5 Owner's Manual
NOTE
For information on the panel settings
that are called up by One Touch Setting,
Refer to the OTS section of "Parameter
Chart" in the Data List. The Data List is
available on the website.
NOTE
You can memorize original settings to
One Touch Setting. For instructions,
refer to the Reference Manual on the
website.