Table of Contents
Advertisement
4
Enter the file name.
Even if you skip this step, you can rename (page 31) the file at any time after sav-
ing.
5
Press the [8 ] (OK) button to actually save the file.
The saved file will be automatically located at the appropriate position among the
files in alphabetical order.
Creating a New Folder
You can create folders.
1
In the file selection display, select the appropriate tab (USER,
HD or USB) to which you want to create a new folder by using
the TAB [][] buttons.
If you want to create a new folder within an existing folder, also select the folder
here.
2
Make sure that MENU 2 is shown at the bottom right corner of
the display.
If necessary, press the [8 ] button to call up MENU 2.
3
Press the [7 ] (FOLDER) button.
The Character Entry window (page 34) is called up.
4
Enter the name of the new folder.
For detailed instructions on naming, see page 34.
30
Tyros5 Owner's Manual
1
3
NOTE
If you want to cancel the Save operation,
press the [8 ] (CANCEL) button
before step 5 below.
NOTE
A new folder cannot be made in the
PRESET tab.
NOTE
The maximum number of files/folders
which can be stored in a folder is 500.
NOTE
In the USER tab, folder directories can
contain up to four levels. The maximum
total number of files/folders which can
be stored differs depending on the file
size and the length of the file/folder
names.
NOTE
To cancel the operation, press the
[8 ] (CANCEL) button.
NOTICE
Do not use "Expansion" for the
folder name. Otherwise, all data
contained in the "Expansion"
folder will be lost when an Expan-
sion Pack is installed.
Advertisement
Table of Contents
