Table of Contents
Advertisement
Playing Different Voices with the Left and Right Hands (Split)
1
Make sure that at least one of the PART ON/OFF [RIGHT 1]–
[RIGHT 3] buttons are turned on.
2
Press the PART ON/OFF [LEFT] button to turn it on.
3
Press one of the VOICE buttons to call up the Voice Selection
display for the Left part.
4
Press one of the [A]–[J] buttons to select the desired Voice.
5
Play the keyboard.
The notes you play with your left hand sound one Voice (LEFT Voice selected
above), while the notes you play with your right sound different Voices (RIGHT
1–3 Voices).
Keyboard Parts
The Voices can be played via four keyboard parts: Left, Right 1, 2 and 3. These playing parts allow you to play
just one single Voice, play two or three different Voices (Right 1, 2 and 3) simultaneously, or play different
Voices in the right- and left-hand sections of the keyboard (Right 1/2/3 and Left). You can combine these parts
by using the PART SELECT and PART ON/OFF buttons to create luscious instrument textures and convenient
performance combinations.
Left-hand (LOWER) section
When the Left part is turned off, the entire keyboard is used for the Right 1, 2 and 3 parts. When the Left part
is turned on, the F#2 and lower keys are used for the Left part while the upper keys (excluding F#2) are used
for the Right 1, 2 and 3 parts. The key which divides the keyboard into the left-hand and right-hand sections is
referred to as "Split Point."
NOTE
The Split Point can be changed (page 62).
38
Tyros5 Owner's Manual
Split Point
Voice RIGHT 1, 2, 3
Voice LEFT
(UPPER)
(LOWER)
Right-hand (UPPER) section
Split Point (F#2)
You can save the settings to Registra-
tion Memory. See page 85.
Selecting the keyboard part
Turning on/off the keyboard parts
NOTE
Advertisement
Table of Contents
