Yamaha Tyros5-76 Owner's Manual page 21

x
TAB [][] buttons
These buttons are used mainly to change the pages of displays that have "tabs" at the top.
c
[ASSIGN] slider
The [ASSIGN] slider is used to adjust the setting of a user-assigned
function. By default, this slider is used to adjust the keyboard volume
directly during your performance.
v
[1]–[8] sliders
These sliders are used to adjust settings (up or down correspondingly) for functions shown directly above them, only
when the menu is shown in a knob or slider shape.
[1 ]–[8 ] buttons
b
The [1 ]–[8 ] buttons are used to make selections or adjust settings (up or down correspondingly) for functions
shown directly above them.
Knob or slider in the
display can be adjusted
by the corresponding
[1]–[8] sliders.
For menus that appear
in this section of the
display, use the [1 ]–
[8 ] buttons.
For menus that appear
in this section of the
display, use the [1 ]-
[8 ] buttons.
NOTE
You can freely change the function
assigned to the [ASSIGN] slider:
[FUNCTION]  [D] CONTROLLER 
TAB [][] ASSIGN SLIDER.
For list menus that
appear, use the [1 ]–
[8 ] buttons to select
the desired item.
For parameters that
appear in slider (or knob)
form, use the [1 ]–
[8 ] buttons to adjust
the value.
Tyros5 Owner's Manual
21