Tamper Alarm; Restore To Factory Setting - netvox ZB11A1 User Manual

every 84 seconds (120 * 70%) by default. Until no additional movement is detected within the period of 120
seconds, ZB11A1 will go to Unoccupied condition and send the report to ZigBee network.
 After ZB11A1 joins the ZigBee network, the infrared sensor will not be active within 1 minute.
 Under the circumstances ZB11A1 is not in a ZigBee network, it will start to join a network after the
ZB11A1 detects a movement.
 Users could change the detecting sensitivity by adjusting the Sensor Sensitivity Adjuster.
Clockwise adjustment → Higher sensitivity
 The default sensitivity is medium sensitivity as the picture below.

5-8. Tamper Alarm

ZB11A1 features tamper alarm. When the cover is opened, ZB11A1 will notify the central security unit, CIE
(Control and Indicating Equipment) device, to send a command to a Warning Device.

5-9. Restore to Factory Setting

To restore it to factory setting, please follow the steps:
Step1. Press and hold the Auxiliary Key for 10 seconds.
Step2. After the indicator shows fast green flashes, release the button to complete the restore.
9