Related Manuals for netvox R711
Summary of Contents for netvox R711
- Page 1 R711 Model： Wireless Temperature And Humidity Sensor Temperature And Humidity Sensor User Manual...
-
Page 2: Table Of Contents
Table of Content 1. Introduction ................................2 2. Appearance ................................3 3. Main Features ................................3 4.Set up Instruction ..............................4 4.1 Power on and Turn on / off ..........................4 4.2 Join Into Lora Network ..........................4 4.3 Function Key ..............................4 4.4 Data Report .............................. -
Page 3: Introduction
Introduction R711 is a long distance wireless temperature and humidity sensor based on LoRaWAN open protocol (Class A). LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance. -
Page 4: Appearance
2. Appearance Temperature / Himidity Sensor Probe LED Indicator Function Key Battery Cover 3. Main Features Compatible with LoRaWAN 2 section 1.5V AA Alkaline battery Report voltage status, temperature and humidity of indoor air Easy set up and installation ... -
Page 5: Set Up Instruction
The network operation is as following: (1) If R711 had never joined any network, turn on the device; it will search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator will be off. -
Page 6: Restore To Factory Setting
1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LED flashes quickly 20 times. 2. R711 will stay off after restoring to factory setting. Press function key to turn on R711 and to join a new LoRa network. -
Page 7: Important Maintenance Instruction
8. Important Maintenance Instruction This device is NOT truly waterproof/ resistant and is for indoor use. Please keep the device in a dry place. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. In cases of accidental liquid spills to a device, please leave the device dry properly before storing or using. - Page 8 FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the R711 and is the answer not in the manual?
Questions and answers