Caster And Leg Mounting Detail; Loosen Freezer Compressor Bolts - Delfield 400 Series Original Instructions Manual

Section 2

CASTER AND LEG MOUNTING DETAIL

A universal bolt hole pattern is provided on the bottom of
the cabinet. It will accommodate any leg or caster. Simply
line up the plate holes with the corresponding cabinet
holes.
3.40"
3.40"
(86mm)
(86mm)
NOTE: If hole pattern on caster/leg matches the one above
mount in outer set of holes.
• 6" Leg - 3234569
2.82"
2.82"
(72mm)
(72mm)
NOTE: If hole pattern on caster/leg matches the one above
mount in middle set of holes.
• 3" Caster - 3234024
• 5" Caster - 3234161
• 6" Leg - 3234791
2.14"
2.14"
(54mm)
(54mm)
Part Number: 9294045 10/14
2.38"
2.38"
(60mm)
(60mm)
1.75"
1.75"
(44mm)
(44mm)
0.94"
0.94"
(24mm)
(24mm)
2.14"
(54mm)
NOTE: If hole pattern on caster/leg matches the one above
mount in inner set of holes.
• 2" Caster - 3234148

Loosen Freezer Compressor Bolts

Semi hermetic models should be loosened before
operating. Loosen (but do not remove) the bolts on the
compressor. If not done the freezer may vibrate excessively
when the compressor is running,
Installation
0.94"
(24mm)
11