Table of Contents
Advertisement
15. Use Browse to select the tone (.wav file) for a Good Scan. This tone
is heard whenever a bar code is successfully scanned.
16. Tap Play to hear the tone.
17. Use Browse to select the tone (.wav file) for No Scan. This tone is
heard whenever a bar code is unsuccessfully scanned.
18. Tap Play to hear the tone.
19. Tap OK to save all the settings and return to the Scanner
Configuration screen.
E n a b l i n g S p e c i f i c B a r C o d e s
You must enable and disable each specific bar code type for scanning.
Some bar codes require additional settings.
You can scan any of the following bar codes:
♦
UPC/EAN
♦
Code 39
♦
Code 128
♦
I 2of5
♦
MSI
Note:
Some bar codes can be printed, but not scanned. See "Printable
Bar Codes vs. Scannable Bar Codes" for more information.
♦
Codabar
♦
Code 93
♦
D 2of5
♦
RSS
Configuring the Scanner 5-5
Advertisement
Table of Contents
