Copying A Batch - Monarch 9400 Series Operator's Handbook Manual

9400 Series Operator's Handbook
You can use the AUTO feature for multiple formats during
printing. However, the numbering for AUTO does not start at 1
for each format. It continues sequentially, regardless of the
format.
For example, suppose you need to print four batches: two
using Format 1, and two using Format 2. First, select Format
1 and print out batches with the AUTO feature; AUTO1 and
AUTO2 are assigned to these batches. Next, switch to Format
2 to print the last two batches. AUTO3 and AUTO4 are
assigned to these two batches.

Copying a Batch

To save time at data entry, you can copy batch data from one
batch to the next. To copy a batch:
1. Enter the data for your first batch as usual (you can name
the first batch manually). After the batch has printed, you'll
see
2. Just press
E
3. You'll then see data entry prompt with previously entered
data. For each prompt you can either change the data and
press
4. When you have changed all the data you want to change,
#
press . The printer will begin to print the copied batch
with the new data.
NOTE: If the batch quantity was not pre-set by
management for the format you are using, you
must enter a batch quantity.
2-14
Format: NAME
E
Enter Batch Name:
. The screen will briefly display
COPIED batch AUTO#_
E
, or press
SAMPLE
SAMPLE
only to leave the data as is.