Table of Contents
Advertisement
Problem
The flame ring is uneven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display shows "12.00".
Steam and condensation
settle on the food and in the
cavity of the oven.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
13. INSTALLATION
13.1 Technical data
Dimensions
Height
Width
Depth
Top oven capacity
WARNING!
Refer to Safety chapters.
894 - 912 mm
595 mm
600 mm
40 l
Possible cause
Burner crown is blocked with
food residues.
The oven is deactivated.
The clock is not set.
The necessary settings are
not set.
The lamp is defective.
There was a power cut.
You left the dish in the oven
for too long.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
Dimensions
Main oven capacity
13.2 Location of the appliance
You can install your freestanding
appliance with cabinets on one or two
sides and in the corner.
ENGLISH
Remedy
Make sure that the injector is
not blocked and the burner
crown is clean.
Activate the oven.
Set the clock.
Make sure that the settings
are correct.
Replace the lamp.
Reset the clock.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
79 l
25
Advertisement
Table of Contents
