Installing And Removing Ops Module (Sl461A) (Optional) - BenQ SL461A User Manual

1.5.

Installing and Removing OPS module (SL461A) (optional)

To install OPS Module:
1. Power off the display.
2. Remove the cover of OPS after take screw off.
3. Insert OPS module and then fix by screw.
4. After inserting the stand in the guide block, tighten the screws on both sides of the display.
NOTE: Keep the OPS cover for future use.
Screw
Screw
To remove OPS Module:
1. Power off the display.
2. Remove screw and plug out OPS module.
3. Install OPS cover and then fix by screw.
3