Installing The Destop Stands - BenQ ST550K User Manual

6 Setting up the display

Installing the destop stands

Install metal support and Iron base according to direction in the picture, and note that
locking them tightly with 4 PCS Φ5×7mm flat-head machine screws after screw holes
aligned(except for installation finished part).
then stick them on metal support. Notice to distinguish right and left foot mat installation
direction (Do not need to operation this for base pad sticking process finished situation)
Then lock base and base support with 4PCS Φ4×(10+8)mm H-head machine screws.
Finally, lock the whole base module on machine back cover with 4PCS Φ4×16mm B-head
machine screws.
Metal support
Iron base
Make base pad holes and screw center aligned,
Φ5×7mm screws
Base support
Base pad
Φ4×(10+8)mm screws
Φ4×16mm screw
.