Table of Contents
Advertisement
16
Connection
Connecting power
1. Plug the adapter into the DC IN jack on the display.
2. Plug one end of the power cord into the adapter and the other end into an
appropriate power outlet (if the outlet is switched, turn on the switch).
3. The power indicator on the bottom panel of the display will light up red then green,
and the display will automatically power on
3
• The supplied power cord is suitable for use with 100-240V AC power only.
• The power cord and outlet illustrated may differ from the ones used in your region.
• Only use an appropriate power cord for your region. Never use a power cord which appears
damaged or frayed, or change the plug type on the power cord.
• Be aware of the power loading when you use extension cords or multiple outlet power boards.
• There are no user serviceable parts in this display. Never unscrew or remove any covers.
There are dangerous voltages inside the display. Turn off the power and unplug the power cord
if you intend to move the display.
Installing the Adapter Holder (Optional Accessory)
An optional holder for the adapter is available to secure the adapter to the rear panel of
the display and keep it from hanging loosely. To install the adapter holder on the display:
1. Place the adapter in the holder so that the DC-in cable of the adapter extends out of
the top side of the holder and the power socket of the the adapter aligns with the
opening at the bottom of the holder.
2. Place the adapter holder onto the rear panel of the display so that the two screw
holes on the holder align with the two screw holes on the left side of the rear panel.
3. Secure two screws onto the holder.
2
1
Advertisement
Table of Contents
