Configuration1 Menu - BenQ SL461A User Manual

NOTES:
• The PIP function is available only for certain signal source
combinations as shown in the table below.
• The availability of the PIP function will also depend on the
resolution of the input signal being used.
Main Picture
DVI VGA HDMI YPbPr
Sub Picture
DVI X X
VGA X X
HDMI X X
YPbPr X X
DP X O
Video O O
Card OPS X X
(O: PIP function available, X: PIP function unavailable)
By pressing the [PIP ON/OFF] button on the remote control,
you can change the mode in the order shown below:
PIP POP
The resolutions in the PIP and POP modes are configured as
follows:
PIP SIZE {SMALL} : 320 x 240 pixels
{MIDDLE} : 480 x 320 pixels
{LARGE} : 640 x 480 pixels
POP SIZE : 474 x 355 pixels
NOTE: The images displayed in the sub picture always fit the
PIP sizes shown above irrespective of the aspect ratio
of the input image.

4.2.5. CONFIGURATION1 menu

CONFIGURATION1
OFF TIMER
SCHEDULE
DATE AND TIME
CONFIGURATION1 RESET
PIP
1 1
2
3
:SEL :NEXT
SET
OFF TIMER
Set the display to turn itself off to standby mode within an
amount of time specified.
The options are: {OFF, 1HOUR ~ 24HOURS} from currrent
time.
DP Video
X X X O
X X O O
X X X O
X X O O
X O X O
O O O X
X X X O
SBS ASPECT SBS FULL
OFF
:RETURN :EXIT MENU
EXIT MENU
SCHEDULE
This function allows you to program up to 7 (seven) different
scheduled time intervals for the display to activate.
You can select:
• The time for the display to turn on and turn off.
• The days in a week for the display to activate.
Card
OPS
• Which input source the display will use for each scheduled
X
activation period.
X
NOTE: You should set up current date and time in {DATE
X
X
1. Press [SET] button to enter the submenu.
X
O
SCHEDULE
X
TODAY
1
2
3
OFF
4
5
6
7
+-:SEL
2. Press [
number 1 ~ 7), and then press [SET] button to mark it the
item number.
SCHEDULE
TODAY
1
2
3
4
5
6
7
+-:SEL
3. Press [ ] or [ ] button to select the schedule:
1
2
Select or leave an empty "__" for both the hour and minute
slot if you do not want to use this power-on or power-off
schedule.
3
4
AND TIME} menu before using this function.
2011 . 08 . 04
ON OFF
＿ : ＿ ＿ : ＿
EVERY DAY MON
WED THU
SAT SUN
:RETURN
EXIT
] or [ ] button to select a schedule item (item
2011 . 08 . 04
1
ON OFF
＿ : ＿ ＿ : ＿
EVERY DAY MON
WED THU
SAT SUN
:RETURN
EXIT
POWER-ON schedule: Press [
the hour and minute for the display to turn on.
POWER-OFF schedule: Press [
set the hour and minute for the display to turn off.
INPUT-SOURCE selection: Press [
select an input source. If no input source is selected,
the input source will remain the same as last selected.
DATE schedule: Press [ ] button to select which day
in a week this schedule item will be take effect, and
then press the [SET] button.
THU 20 : 19 : 55
INPUT
＿
TUE
FRI
EVERY WEEK
:EXIT MENU
MENU
THU 20 : 19 : 55
2 3
INPUT
＿
4
TUE
FRI
EVERY WEEK
:EXIT MENU
MENU
] or [ ] button to set
] or [ ] button to
] or [ ] button to
17