Table of Contents
Advertisement
Example: 2 x 2 screen matrix (4 displays)
H MONITORS = 2 displays
V MONITORS = 2 displays
H MONITORS
1
3
Example: 5 x 5 screen matrix (25 displays)
H MONITORS = 5 displays
V MONITORS = 5 displays
H MONITORS
1
2
6
7
11
12
16
17
21
22
• H MONITORS - Select the number of displays on the
horizontal side.
• V MONITORS - Select the number of displays on the
vertical side.
• POSITION - Select the position of this display in the screen
matrix.
• FRAME COMP. - Choose to turn the frame compensation
function on or off. If turned on, the display will adjust the
image to compensate for the width of the display bezels in
order to accurately display the image.
• ENABLE: Choose to enable or disable the Tiling
function. If enabled, the display will apply the settings
in {H MONITORS}, {V MONITORS}, {POSITION}, and
{FRAME COMP.}.
NOTE: The Tiling function will be disabled when the [ON/
OFF] button for PIP is pressed.
POWER ON DELAY
Select the delayed time until the power-on mode is activated
after the power is turned on manually or automatically. This
setting is useful in hiding start-up messages and powering on
the connected devices at different timings.
The options are: {OFF}, {2 SEC.}, {4 SEC.}, {6 SEC.}, {8
SEC.}, {10 SEC.}, {20 SEC.}, {30 SEC.}, {40 SEC.}, {50
SEC.}.
2
4
3
4
5
8
9
10
13
14
15
18
19
20
23
24
25
CLOSED CAPTION
Choose to display or hide captions.
NOTE: This item is functional for VIDEO input only.
•
{OFF} - Captions are hidden.
•
{CC1} - Captions are displayed in sync with the primary
audio.
•
{CC2} - Information (related to the primary audio) is
Position
displayed without sync.
•
{CC3} - Captions are displayed in sync with the secondary
audio.
•
{CC4} - Information (related to the secondary audio) is
displayed without sync.
•
{TT1 / TT2 / TT3 / TT4} - Four types of information not
related to the displayed images are displayed. (For
example, news and weather forecast.)
NOTE: Check with each supplier of your video software and
external video devices in advance whether they are
compliant with EIA-608-A. If their video signals are
not compliant with it, images may not be displayed
correctly.
CONFIGURATION2 RESET
Reset all settings in the CONFIGURATION2 menu to factory
Position
preset values.
4.2.7. CONFIGURATION3 menu
PIP
1
2
3
3
POWER SAVE
Set the display to reduce the power automatically.
POWER SAVE
RGB
VIDEO
:SEL
•
{RGB} - Select {ON} to let the display enter DPMS mode
with no signal detected from the HDMI Graphic mode,
HDMI, DVI-D, or VGA inputs after three successive cycles.
•
{VIDEO} - Select {ON} to let the display enter power saving
mode with no signal detected from the HDMI Video mode
or YPbPr inputs after three successive cycles.
CONFIGURATION3
POWER SAVE
HEAT STATUS
SCREEN SAVER
SIDE BORDER COLOR
CONFIGURATION3 RESET
:SEL
:NEXT
:RETURN
SET
EXIT
+-:ADJ
:RETURN
EXIT
51
:EXIT MENU
MENU
ON
ON
:EXIT MENU
MENU
19
Advertisement
Table of Contents
Troubleshooting
