BenQ SL461A User Manual page 23

• {INTERLACE} - Disable the IP function. This mode is
suitable for displaying motion pictures, but it increases the
chance of image retention.
COLOR SYSTEM
Selects the Color System depends on your input video format.
The options are: {AUTO} / {NTSC} / {PAL} / {SECAM} /
{4.43NTSC} / {PAL-60}.
NOTE: This item is functional for VIDEO input only.
SCAN MODE
Change the display area of the image.
• {OVERSCAN} - Display about 95% of the original size of the
image. The rest of the areas surrounding the image will be
cut off.
• {UNDERSCAN} - Display the image in its original size.
NOTE: This item is functional for HDMI-Video timing input
only.
SERIAL CONTROL
Select the network control port.
The options are: {RS-232C} / {LAN}.
NOTE: If {LAN} is selected, then {RS-232C} will not be
activated, even if a cable is attached, and vice versa.
LAN SETTING
Assign {IP ADDRESS}, {SUBNET MASK}, and {DEFAULT
GATEWAY} for the display.
DHCP CLIENT
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
PIP
1
2
3
:SEL +-:ADJ
• DHCP - Choose to enable or disable the DHCP function. If
enabled, the display will be assigned IP address, Subnet
mask and Default gateway automatically. If disabled, you will
be prompted to enter the following value manually. Finally,
press [SET] button to store and save the chosen values.
-
APM Power save setting
1. {•Off} - No signal, direct shutdown. (Default)
2. {•On} - No signal, enter into Power Save mode.
ADVANCED OPTION RESET
Reset all settings in the ADVANCED OPTION menu to factory
preset values.
1. Press [SET] button to enter the submenu.
2. Press [ ] or [ ] button to select {YES}, and then press
[SET] button to do the reset.
LAN SETTING
OFF
:RETURN :EXIT MENU
EXIT MENU
ADVANCED OPTION RESET
NO
YES
:SEL :SET
SET EXIT
FACTORY RESET
Reset all the settings in the OSD menus of {PICTURE},
{SCREEN}, {AUDIO}, {PIP}, {CONFIGURATION1},
{CONFIGURATION2}, {CONFIGURATION3}, and {ADVANCED
OPTION} to factory preset values.
1. Press [SET] button to enter the submenu.
2. Press [ ] or [ ] button to select {YES}, and then press
[SET] button to do the reset.
FACTORY RESET
NO
YES
:SEL :SET
SET EXIT
:RETURN :EXIT MENU
MENU
:RETURN :EXIT MENU
MENU
21