Setting Up The Display; Mounting The Display; Installing The Desktop Stands - BenQ ST550K User Manual

Hide thumbs Also See for ST550K:

Table of Contents

Setting up the display

You can install the display on a vertical surface with a suitable wall mounting bracket or

on a horizontal surface with the optional desktop stands. Please pay attention to the

following notes during installation:

• This display should be installed by at least two adult persons. Attempting to install this

display by only one person may result in danger and injuries.

• Refer the installation to qualified technicians. Improper installation may cause the

display to fall or malfunction.

1. Lock the metal support and the iron base tightly with 4 pieces of Φ5 × 7 mm flat-

head machine screws until all the screw holes are aligned.

2. Make base pad holes and the screw center aligned and stick them on the metal

support. Be sure to distinguish the installation direction of the right and left base

pads.

3. Lock the base and the base support with 4 pieces of Φ4 × (10 + 8) mm H-head

machine screws.

4. Lock the whole base module on the back cover of the machine with 4 pieces of Φ4

× 16 mm B-head machine screws.

Metal support

Iron base

Φ5 × 7 mm screws

Base support

Φ4 × 16 mm screws

Base pad

Φ4 × (10 + 8) mm screws

Table of Contents