To Relieve Sprayer Pressure - KRAUSE & BECKER 60600 Owner's Manual

if Sprayer is not properly cleaned immediately after every use.
Clean Sprayer immediately to prevent permanent damage.

To Relieve Sprayer Pressure

1. Turn Power Switch off and unplug unit from outlet.
2. Switch Prime/Spray switch to Prime mode
to safely release most pressure.
3. Point gun into paint pail and activate Sprayer
Trigger to relieve an remaining pressure.
ITEM 60600
RETURNS NOT ACCEPTED & WARRANTY VOID
OFF
For technical questions, please call 1-888-866-5797.
Note: Always set to Prime mode between uses.
Page 11