Changing The Basic Settings - Siemens HB 33 K SERIES Instructions For Use Manual

Changing the basic
settings
Example: Hiding the time
You do not wish to change
all the basic settings
Correcting settings
70
There must be no program set.
1.
Press the clock button and the + button at the
6
same time until a
This is the basic setting for the time in the
foreground.
2.
Change the basic setting using the + or – button.
3.
Conform with the
2
A will appear in the display for the basic setting for
the signal duration.
Change the basic setting as described in step 2 and
confirm with the
6
change the reset time. To finish press the
button.
If you do not wish to change a basic setting, press
the clock button. The next basic setting will
6
appear.
You may change your settings again at any time.
1
appears in the display.
clock button.
6
clock button. You can now
clock
6