Table of Contents
Advertisement
OnSite Series Getting Started Guide
See
"Web-Based Management Interface"
features. Once you gain access to the system through the Ethernet LAN port, you may change the IP settings
for the port for secure access in the future.
5. Refer to the OnSite Series Administrator's Reference Guide, located on the CD that came with your unit and
online at www.patton.com for instructions on how to change the IP settings for the Ethernet LAN port.
CAUTION
Note
Web-Based Management Interface
The system provides a simple but powerful Web-based management interface to configure and monitor the
OnSite OS-10 system. This graphical user interface (GUI) is called the OnSight Device Manager (DM) and is
accessible through a Web browser using Hypertext Transfer Protocol (HTTP).
Note
The OnSight DM allows you to have full access to the system management functions. These functions include
the ability to set up or change all configurable items on the system and the ability to create and delete connec-
tions between the client ports and SDH network interface. The interface also allows you to monitor and dis-
play current active alarms, performance monitoring parameters, and alarm and event logs.
Launching the GUI Application
To launch the Web-based management interface, follow these steps:
Note
1. Connect the PC to the Ethernet LAN management port using the RJ-45 connector.
Note
2. Launch the Web browser of your choice, and type the IP address of the system in the Address field of the
browser.
3. Log in to the system using the super, admin, or monitor user ID and password.
Web-Based Management Interface
on page 45 for a description of the Web-based management interface
Save the system configuration to prevent the loss of the new IP
settings if a system reboot occurs.
Refer to the OnSite Series Administrator's Reference Guide,
located on the CD that came with your unit and online at
www.patton.com for instructions.
Once the changes take place, you will loose connectivity to the sys-
tem, but you can regain access immediately by typing the new IP
address of the system in the Address field of the browser.
The system supports the following Web browsers: Microsoft Internet
Explorer 6+, Netscape 7+, Mozilla 1.7+, and Mozilla Firefox 1.0+ on
Windows, Solaris, and Linux platforms.
This procedure requires prior configuration of the IP address of the
Ethernet LAN management port through the RS-232 SERIAL port
or LAN port, as indicated in §6.4.
You may connect the PC to the system from a remote location using
an IP LAN or WAN that connects to the Ethernet LAN management
port.
4 • System Management Access
45
Advertisement
Table of Contents
