Table of Contents
Advertisement
OnSite Series Getting Started Guide
Gaining Access to the System
There are two ways of gaining access to the system management functions. One way is through the SERIAL
port and the command line interface (CLI). The other way is through the Ethernet LAN port and the web
browser interface. The following sections describe the procedures for each of the access methods.
Access through the Serial Port
To gain management access to the system for the first time through the SERIAL port, follow these steps:
1. Connect a PC to the SERIAL management port.
Note
2. Launch the VT100 terminal emulation program on the PC.
Note
3. Press the Enter key on the PC to obtain a login prompt from the system.
4. Log in to the system using the Super user ID and password.
Note
Note
Note
After successful completion of the login, the system responds with the CLI (command-line interface)
prompt.
Note
5. Type the following CLI command to configure the IP address for the Ethernet LAN management port,
and then press the Enter key:
config mgmt-enet ip-address aaa.bbb.ccc.ddd
Note
6. Type the following CLI command to configure the net mask for the Ethernet LAN management port, and
then press the Enter key:
config mgmt-enet ip-netmask aaa.bbb.ccc.ddd
7. Type the following CLI command to configure the default gateway for the Ethernet LANmanagement
port, and then press the Enter key:
config mgmt-enet default-gateway aaa.bbb.ccc.ddd
Note
Gaining Access to the System
Use the DB-9-to-RJ-45 adapter cable supplied with the system.
Configure the terminal in accordance with the settings in Table 14.
Only the Super user is able to perform the following task.
The user ID for the Super user is super (all lowercase letters).
The factory-assigned default password for the Super user is super (all
lowercase letters).
The CLI command prompt for the system is OnSite >
aaa.bbb.ccc.ddd is the standard dotted-decimal notation.
By default, the IP address is set to 192.168.2.100, the net mask is set
to 255.255.255.0, and the default gateway is set to 192.168.2.1
4 • System Management Access
43
Advertisement
Table of Contents
