Ethernet Lan Management Port; Detail Of The Management Ports; Location Of Signal Pins On The Rj-45 Plug; Ethernet Lan Management Port Cabling Specifications - Patton electronics OnSite 07MOS10xx-GS Getting Started Manual

Metro-optical transport access nodes
Table of Contents

Advertisement

OnSite Series Getting Started Guide
Figure 15
provides a close-up view of the two management ports. The figure includes the location of the RJ-45
connector pins for both ports.
Figure 16
shows the location of the signal pins on the RJ-45 plug.

Ethernet LAN Management Port

The Ethernet LAN management port complies with the following standards:
IEEE 802.3u (PHY)
IEEE 802.3 (MAC)
IEEE 802.3x (flow control)
The port supports autonegotiation, which is always enabled.
Table 10
provides the cabling specifications for the Ethernet LAN management port.
Table 10. Ethernet LAN Management Port Cabling Specifications

Ethernet LAN Management Port

Figure 15. Detail of the Management Ports
Figure 16. Location of Signal Pins on the RJ-45 Plug
Cable
Connector
Type
Reach
4 • System Management Access
Specification
RJ-45
Category 5
100 m
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Onsite 1063Onsite 1052 seriesOnsite 1063 series

Table of Contents