AEG PRO COMBI BS730470KM User Manual page 18

18 www.aeg.com
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
The display shows
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
4. Touch
temperature.
5. Touch
automatically after 5 seconds.
on the handle) into
flashing and the
or to set the core
or the settings save
You can set the core
temperature only when
flashes. If
display but does not
flash before you set the
core temperature, touch
and or
a new value.
6. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
While the appliance calculates the
approximate duration time, the display
shows the count up time. After the first
calculation the display shows the
approximate duration of the cooking
time.
The appliance continues to calculate the
duration during the cooking. The display
updates at intervals with the new
duration value.
When you cook with the
core temperature sensor,
you can change the
temperature shown in the
display. After you put the
core temperature sensor in
the socket and set an oven
function and temperature,
the display shows the
current core temperature.
Touch again and again to
see three other
temperatures:
• the set core
temperature
• the current oven
temperature
• the current core
temperature.
When the meat is at the set core
temperature, an acoustic signal sounds
for two minutes and the value of the core
temperature and
deactivates.
7. Touch a sensor field to deactivate
the acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the
meat from the appliance.
is in the
to set
.
flash. The appliance