AEG PRO COMBI BS730470KM User Manual page 44

Table of Contents

Advertisement

44
www.aeg.com
Symbol
S1
S2
S3
S4
12.5 Activating a cleaning
function
1. Activate the appliance.
2. Touch
In some models you can also choose
S2, S3, S4.
3. Touch
function.
4. Touch
12.6 Tank Emptying - S1
Remove all accessories.
The cleaning function removes the
residual water from the water drawer.
Use the function after the steam cooking
function.
The duration of the function is around 6
minutes.
The light in this function is off.
1. Put the tray on the first shelf position.
2. Activate Tank Emptying function - S1.
Refer to "Activating a cleaning
function".
3. Touch
Remove the baking tray after the end of
the procedure.
12.7 Steam Cleaning - S2
Remove as much dirt as possible
manually.
Remove the accessories and the shelf
support to clean the side walls.
Menu item
Tank Emptying
Steam Cleaning
Descaling
Rinsing
until the display showsS1.
or
to select a cleaning
to confirm.
.
Description
Procedure for removing the residual water
from the water drawer after use of the
steam functions.
Cleaning the appliance with steam.
Procedure for cleaning the steam genera-
tion circuit from residual limestone.
Procedure for rinsing and cleaning the
steam generation circuit after frequent use
of the steam functions.
The steam cleaning functions support
the steam cavity cleaning of the
appliance.
For a better performance
you should start the cleaning
function when the appliance
is cool.
The specified time is related
to the duration of the
function and does not
include the time required for
cleaning of the cavity by the
user.
When the steam cleaning function is
active, the lamp is off.
1. Fill the water drawer to the maximum
level (around 950 ml of water) until
the acoustic signal sounds or the
display shows the message.
2. Activate Steam Cleaning function -
S2. Refer to "Activating a cleaning
function".
The duration of the function is
around 30 minutes.
An acoustic signal sounds when the
programme is completed.
3. Touch a sensor field to deactivate
the signal.
4. Wipe the internal surface of the
appliance with a non-abrasive surface
care sponge. You can use warm
water to clean the cavity.
After cleaning keep the appliance door
open for approximately 1 hour. Wait until
the appliance is dry. To speed up the
drying you can heat up the appliance

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pro combi bs730472kmPro combi series bs730470kmPro combi series bs730472kmBe1731410mBe1731410wBe1731410b

Table of Contents