Mitel 7147 User Manual page 22

Disable Ring Signal
To disable the ring signal for incoming calls:
1.
Unlock the phone
Press the 'Volume – until you reach Silence level (long press 3 sec).
2.
The display will show "RING OFF" to notify the user that the ring signal is disabled.
The Mute key LED is off but flashes at 0.5 second intervals when there is an incoming call
Set Handset Volume
Four levels of handset volume is provided: Level 1 to 4
1. Pick up the handset
2. Press 'Volume +' to increase the handset volume
3. Press 'Volume –' to decrease the handset volume
Set Headset Volume
Four levels of headset volume is provided: Level 1 to 4
Plug in the headset
1. Press [
2. Press 'Volume +' to increase the handset volume
3. Press 'Volume –' to decrease the handset volume
Set Handsfree Volume
Eight levels of handsfree volume is provided: Level 1- 8
1. Pick up handset
2. Press [
3. Press 'Volume +' to increase the handsfree volume
4. Press 'Volume –' to decrease the handsfree volume
Set password
A 4 digits combination password can be set to the phone in order to lock some critical parameters
settings and speed dial memories from changing by unauthorized users.
Change password
1. During On-hook, press [ save] + [#]+[0]+[5]+[#]+[XXXX]+[#] +[YYYY]+[#]+[YYYY]+[#].
2. [ XXXX] is the old password; [ YYYY] is the new password. (Default 0000)
The saved new password will be asked for only when the phone is locked
| LZT 102 4162 | Uen | PR2C | 2016-03-04|
]
]
Mitel 7147 User Guide – PR2C
17