Setting Operating Pressure And Flow Rate; Measuring Out Cleaning Agents; Intended Use - Kärcher HDS Super SX Operating Instructions Manual

Operating Instructions
Setting operating pressure and
flow rate
Figure 10
— Turning regulator clockwise: Increases
operating pressure (MAX)
— Turning counter-clockwise: Reduces
operating pressure (MIN)
Servopress control
! Set the temperature regulator (item 24)
to max. 98°C.
! Set regulator to maximum operating
pressure.
Figure 9
Operating pressure and flow rate can be
set at handgun.
Set pressure on unit if use is to be made of
reduced pressure for a lengthy period.
See Figure 10

Measuring out cleaning agents

— Use cleaning agents sparingly to protect
the environment
— The cleaning agent must be appropriate
for the surface to be cleaned.
! Using the cleaning agent metering valve
(item30) set the concentration of the
cleaning agent as specified by the
manufacturer
Approximate values at maximum operating
pressure
26
HDS Super SX/HDS 695 SX/HDS 895 SX/HDS 1195 SX

Intended use

Cleaning of: Machines, vehicles, buildings,
tools, facades, terraces, garden tools, etc..
Warning!
— Heed appropriate safety regulations for
use at petrol stations or in other
hazardous environments.
Please ensure waste water containing
mineral oil does not contaminate soil,
lakes and rivers or the sewerage system.
Therefore, please wash engines and
underbodies only in appropriate washing
installations provided with oil traps.
Working with high-pressure nozzle
Spray angle is crucial to efficiency of high-
pressure jet.
Use is normally made of 25°fan jet nozzle
(included).
Recommended nozzles, available as
accessories
— For stubborn dirt
0°full jet nozzle
— For delicate surfaces
and slight contamination
40°fan jet nozzle
— For thick layers of stubborn dirt
dirt blaster
— Nozzle with variable spray angle, for
adaptation to various cleaning tasks
variable-angle nozzle
English