Operating Your Pressure Washer - Kärcher KB 3030 Operating Instructions Manual

4. OPERATING YOUR PRESSURE WASHER

If you have followed all the instructions so far, you are
now ready to have fun cleaning the KARCHER way!!!
• Assembly the Spray Gun (No. 8) and the high-pressure hose (No. 7),
shown on page 19.
• Attach the high-pressure hose to the high-pressure outlet (No. 3) of
the unit.
• Safety Assurance
As an added precaution, your pressure washer is fitted with a safety
locking device on the Spray Gun.
• Turn on the supply water and press the trigger of the Spray Gun
(No. 8) until the water flows freely and removes all air locks from the
hoses.
• You may now attach the Spray Lance (No. 6a) or required accessory
to the Spray Gun.
All accessories are bayonet fit, simply push in and twist
• Once water is flowing through the machine, you may now switch
on your Karcher Pressure Washer using the Power Switch
(No. 2).
WHEN USING YOUR KARCHER PRESSURE WASHER ON
THE HIGH PRESSURE SETTING, THE RECOMMENDED
WORKING DISTANCE BETWEEN THE NOZZLE AND THE
OBJECT OR SURFACE TO BE CLEANED IS 30 CM.
IT CAN BE CLOSER IF REQUIRED FOR PATIOS OR MASONERY
It is your responsibility to check the suitability of the surface to be cleaned.
Karcher (UK) Ltd. cannot be held responsible for any damaged caused.
10
until they click into position !