Servicing The Appliance; Changing The Plug - Russell Hobbs RHI101 Instructions And Warranty

SERVICING THE APPLIANCE

There are no user serviceable parts in this appliance. If the unit is not operating
correctly, please check the following:

You have followed the instructions correctly.

That the unit has been wired correctly and that the wall socket is switched
on.

That the mains power supply is ON.

That the plug is firmly in the mains socket.
If the appliance still does not work after checking the above:
Consult the retailer for possible repair or replacement. If the retailer fails to resolve the
problem and you need to return the appliance, make sure that:

The unit is packed carefully back into its original packaging.

Proof of purchase is attached.

A reason is provided for why it is being returned.
If the supply cord is damaged, it must be replaced by the manufacturer or an
authorised service agent, in order to avoid any hazard. If service becomes necessary
within the warranty period, the appliance should be returned to an approved
Amalgamated Appliances / Tedelex Trading (Pty) Ltd service centre. Servicing outside
the warranty period is still available, but will, however, be chargeable.

CHANGING THE PLUG

Should the need arise to change the fitted plug, follow the instructions below.
This unit is designed to operate on the specified current (on the rating label of
the product) only. Connecting to other power sources may damage the
appliance. Connect a three-pin plug as follows:
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow = Earth
Blue = Neutral
Brown = Live