Advertisement
Quick Links
Applications
What are the primary applications for the Model 1058 VDSL Modem?
Used in pairs (Central Office and Customer Premise), the Model 1058 establishes a high-
speed, line sharing, symmetrical 12.5 Mbps voice and data link. The Model 1058 inter-
connects two geographically separated LANs over a voice-grade twisted pair wire. Operation
is simple: packets destined for the remote LAN are sent transparently, at full line rate, to the
peered LAN. The Model 1058DVs built-in splitter allows users to simultaneously talk on the
phone while surfing the web, downloading files or receiving e-mails.
Other Applications include:
MTU/MDU Integrated Services (Voice and Data)
Network Backbones
Hybrid Copper-Fiber Infrastructure
Fiber To The Closet/VDSL to the desktop
Fiber To The Curb (FTTC)/VDSL to the home
Remote Workstations and Equipment
ISP Last Mile Extension
Remote Medical Imaging
LAN Extension & Service Integration
1
FAQs
FAQs
Advertisement
Related Manuals for Patton electronics 1058DVs
Summary of Contents for Patton electronics 1058DVs
- Page 1 LAN are sent transparently, at full line rate, to the peered LAN. The Model 1058DVs built-in splitter allows users to simultaneously talk on the phone while surfing the web, downloading files or receiving e-mails.
- Page 2 Product Related Questions What is VDSL? VDSL technology (Very high bit-rate Digital Subscriber Line) allows for the simultaneous transmission of voice, data, and video on existing voice-grade copper wires. VDSL is the fastest DSL technology currently available. Depending on the intended applications, VDSL can be set to run symmetrically or asymmetrically.
- Page 3 What are the distance limitations of the Model 1058 using different gauge wires? Using 24 AWG (0.5 mm) wire, the Model 1058 is capable of providing Ethernet extensions up to 4,656 ft (1.42 km) including the potential 328 ft (100 m) Ethernet connections on both ends of the communications link.
- Page 4 Which end of the link should the “CO” Central Office unit and “CP” Customer Premise unit be located? The Model 1058D/CO or 1058DV/CO and 1058D/CP or 1058DV/CP should be located according to their descriptions. The CO should to be placed at the Central Office and the CP should be placed at the Customer Premise due to special filtering for each application.
- Page 5 Ethernet (10 or 100Base-T) Interface What devices typically connect to the Ethernet 10/100Base-T port? Devices that typically connect to the Ethernet port are Ethernet Hubs/Switches, Remote PC’s, and any other network enabled device. How is the Ethernet port configured to accept 10 or 100Base-T? There is absolutely no configuration necessary.