Connecting The Components - Mitsubishi Electric apricot ft series Owner's Handbook Manual

W e l c o m e

Connecting the components

1/8 OWNER'S HANDBOOK
Use the following guidance to connect the components together. It
is important that you take each step in the order indicated.
1. Before connecting any components, ensure that the AC power
supply is switched off or disconnected, and that the system
unit, the monitor, and any peripherals are turned off.
2. Connect the components' signal cables to their respective ports
on the system unit: keyboard, mouse, monitor, audio (where
appropriate) and any other peripherals. Where appropriate,
connect the computer to the network.
3. Connect the various power cords: monitor, system unit and
any other peripherals to nearby, grounded AC power outlets.
Then switch on or connect the AC power supply.
With AC power applied, the system unit is usually in Off [red]
mode. See the Getting Started chapter for more information about
power modes.
Some models incorporate a feature, controlled in BIOS Setup, that
automatically boots the PC to On [green] mode if AC power is
restored, for example, after a power failure. See the on-line help in
BIOS Setup for more information.