Connecting The Components - Mitsubishi Electric Apricot LS340 Owner's Handbook Manual

G e t t i n g S t a r t e d
Do not allow any cables, particularly power cords, to trail across the
floor where they can be snagged by people walking past.
Warning
The computer uses the system unit AC power cord as its "disconnect
device". Ensure that the system unit is positioned close to the AC power
outlet, and that the plug is easily accessible.
To prevent fire and electric shock, do not expose any part of the system
unit to rain or moisture.

Connecting the components

Use the following procedure to connect the components together. It
is important that you take each step in the order indicated. See
Chapter 1, "Introducing...", if you need help identifying the various
ports on the system unit.
1.
2.
3.
4.
5.
6.
7.
8.
2/2 APRICOT LS/VS340 OWNER'S HANDBOOK
If your AC power outlets have switches, set them to their Off
positions.
Ensure that the system unit, the monitor, and any peripherals
are turned off.
Connect the monitor signal cable between the monitor and the
monitor port on the rear of the system unit. (If the monitor
signal cable is connected after the computer is turned on, the
display may appear in monochrome or not at all.)
Where appropriate, connect other signal cables between your
peripherals and their respective ports on the system unit. Make
sure the signal cables are connected securely.
Plug the keyboard cable into the keyboard port on the system
unit. Be careful not to plug it into the mouse port by mistake.
Plug the mouse into the mouse port on the system unit. Never
connect either the keyboard or the mouse while the system
unit is turned on.
Where appropriate, connect the computer to the network.
Connect the monitor power cord between the monitor and the
AC power outlet on the rear of the system unit.