Mitsubishi Electric apricot ft series Owner's Handbook Manual page 56

M o t h e r b o a r d F e a t u r e s & U p g r a d e s
WARNING
You must not use a metal or other conductive implement to remove the
battery. If a short-circuit is accidentally made between the battery's
positive and negative terminals, the battery may explode.
6. Check that the replacement battery looks the same as the
battery you have removed.
7. Taking care not to touch the top or bottom surface of the
battery, pick up the replacement with the positive (+) terminal
upwards. Press the battery into the holder using a non-
conductive implement.
8. Refit the rear drive bay and the system unit panels.
9. Dispose of the discharged battery in accordance with the
battery manufacturer's instructions.
The next time you turn on the computer you will have to run the
BIOS Setup utility to reset the hardware configuration.
OWNERS HANDBOOK 5/15