Mitsubishi Electric apricot ft series Owner's Handbook Manual page 53

M o t h e r b o a r d F e a t u r e s & U p g r a d e s
5/12 OWNER'S HANDBOOK
CAUTION
If the processor is misaligned it will not go into the socket, and any
attempt to force it will damage the processor, the socket or both.
15. Move the securing lever to the locked position. Apply just
enough pressure to overcome the resistance offered by the
lever.
16. Reposition the fan-sink on top of the new processor.
◊ You may have either of two different types of fan-sink.
Note that the larger fan-sink overhangs the socket at one
side.
19a
1
2
17. Re-fasten the fan-sink's retention clip to the front and back of
the ZIF socket.
1
2