Labels On Incubator - Panasonic MCO-230AIC Operating Instructions Manual

LABELS ON INCUBATOR

Warning Safety Labels Applied to the Incubator
Users are advised to avoid accidents by carefully reading the warnings and cautions contained on warning
stickers at key locations on the interior and exterior of the incubator.
Possible Warning/Caution Type
Danger Location of Danger
Burns Hot Surface
Cooling Unit &
Heat Cover
Personal
Hazardous UV Light
injury Interior
Personal Hazardous UV Light
injury Interior
Personal Gas Poisoning or
injury
Oxygen Deprivation
Environment
Personal Gas Poisoning or
injury Oxygen Deprivation
Interior
8
Warning/Caution Label Description of Danger
Avoid touching the cooling unit
and heat cover, which reaches
high temperatures and may cause
burns.
The UV lamp lights by pressing
the door switch. Do not press the
door switch because the UV light
is hazardous.
The UV light is hazardous.
Never turn on the UV lamp without
the cover.
When using CO gas for control,
2
make sure that there
adequate ventilation.
CO gas in a small room without
2
adequate ventilation may cause
gas poisoning or
deprivation. In addition, when
opening the Incubator doors, do
not directly inhale the air in the
chamber.
Excessive pressure may cause
gas supply lines inside
Incubator to come loose, which
may result in gas poisoning or
oxygen deprivation due to the
escaping of gas.
is
Using
oxygen
the