Panasonic MCO-230AIC Operating Instructions Manual page 83

9. On the STD Gas Calibration Step3 screen, CO
2
density calibration starts. Calibration go to Step5
(Procedure 10) automatically.
10. After completion of CO density calibration,
2
display leads the STD Gas Calibration Step5
screen. CO incubator returns to the normal
2
operation.
11. On the STD Gas Calibration Step5 screen,
press OK key to return to the Tools #1 screen. On
the Tools #1 screen, press Top key to return to the
Top screen.
81