Download Print this page

H 2 O 2 Decontamination - Panasonic MCO-230AIC Operating Instructions Manual

Co2 incubator
Hide thumbs Also See for MCO-230AIC:

Advertisement

H
O
DECONTAMINATION
2
2
When the chamber is contaminated or when cleaning the chamber prior to starting a culture, it is possible
to perform H
O
decontamination.
2
2
H
O
decontamination function is workable under any of the following conditions. When the condition is not
2
2
fulfilled, H
O
decontamination can not be performed.
2
2
・When an H
O
generator MCO-HP is installed in the MCO-230AICUVH.
2
2
・When all H
O
generator MCO-HP, H
2
2
installed in the MCO-230AICUV.
・When all UV system set MCO-170UVS, H
electric lock MCO-170EL are installed in the MCO-230AIC.
WARNING
Use the reagent specified by our company for H
may cause explosion or damage to the incubator, or insufficient decontamination.
Do not use chemicals other than the H
the H
O
vapor generator.
2
2
WARNING
When performing H
closed. During H
O
2
to do so may be harmful to health due to leakage of H
WARNING
Never start H
O
decontamination when "Warning: UV Bulb Life" is displayed in the message display field.
2
2
The UV resolve is not sufficient.
CAUTION
H
O
decontamination can be performed only for the chamber and inner attachments with standard
2
2
specifications, and not for any other objects.
CAUTION
Perform H
O
decontamination with the inner attachments arranged as specified by our company.
2
2
Arranging them in a different way may result in insufficient decontamination.
CAUTION
Wear rubber gloves when handling the H
inflammation of the skin.
CAUTION
After H
O
decontamination has been completed, residual H
2
2
chamber, the H
O
2
2
gloves, wipe it off with a non-woven cloth. Failure to do so may result in a deficient culture.
62
O
decon board MCO-170HB and electric lock MCO-170EL are
2
2
O
2
O
2
2
O
decontamination, make sure that the outer and inner doors are securely
2
2
decontamination, plug the access hole with the silicon caps that are provided. Failure
2
O
2
vapor generator, and the bottom of the duct. Wearing protective glasses and rubber
generator MCO-HP, H
2
O
decontamination. Using a different H
2
2
reagent, such as alcohol. Doing so may result in damage to
O
gas.
2
2
reagent. Direct contact with the H
2
O
solution will remain on the bottom of the
2
2
O
decon board MCO-170HB and
2
2
O
2
O
reagent may result in
2
2
solution
2

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Mco-230aicuvMco-230aicuvh