7200-Ase3 Module - D-Link DES-7200 Hardware Installation Manual

DES-7200 Hardware Installation Guide
Sign
Link/ACT
3. Technical Specifications
Table 1-23 Technical Specifications of the 7200-48E
Product Model
Standard
Compliance
Port type
Transmission media
LED
Hot swapability
Power consumption
EMC
Safety regulation
Operating
temperature
Storage
temperature
Operating humidity
Weight
Dimensions
1.6.12

7200-ASE3 Module

Figure 1-19 shows the basic appearance of 7200-ASE3. The 7200-ASE3 is an agent card
that supports MPLS. The line card does not provide any external port for improving the
performance of DES-7200 series.
Description Detailed Information
Electric port:
Off: The port is not linked.
Green: The port is linked at 1000M.
Orange: The port is linked at 10/100M.
Port status
Flashing green: Data is transmitted through the port.
indicator
Optic port:
Off: The port is not linked.
Green: The port is linked.
Flashing green: Data is transmitted through the port.
7200-48E
IEEE 802.3 -2002 Ethernet standard
IEEE 803.ab, IEEE 802.1D, and IEEE 802.1Q
802.1X
44 10/100/1000BASE-T gigabit electric interfaces and 4 electric-optic
multiplexing gigabit interfaces.
Up to 48 1000BASE-T interfaces, or 44 +M 1000BASE-T interfaces and N
1000BASE-X interfaces where M+N=4
10/100/1000BASE-T: 100m (Cat-5 UTP twisted pair)
1000BASE-SX(850nm)
1000BASE-SX(850nm)
1000BASE-LX(1310nm)
1000BASE-LH(1310nm)
Status, Link/ACT
Supported
<100W
GB9254-1998 FCC Class A
GB4943-2001
0 to 40°C
-40 to 70°C
10% to 90% RH
Net weight: 3.5 Kg
436*346*45mm ( L x W x H)
62.5/125um MMF: 220m
50/125um MMF: 500m
9/125um SMF: 10KM
9/125um SMF: 40KM
1-29