7200-24Ge Module - D-Link DES-7200 Hardware Installation Manual

DES-7200 Hardware Installation Guide
Product Model
Transmission media
LED
Hot swappability
Power consumption
EMC
Safety regulation
MTBF
Operating
temperature
Storage
temperature
Operating humidity
Weight
Dimensions
1.6.9

7200-24GE Module

Figure 1-16 shows the basic appearance of the 7200-24GE, the line card module of the
DES-7200 series. 7200-24GE 24 1000M and 100M combo SFP interfaces, that is, it
supports 1000BASE-X and 100BASE-X modes. It features the function of layer-2/3 wire
speed switching. The 7200-24GE module is hot swappable.
Figure 1-16 Basic Appearance of the 7200-24GE
1. Interface
7200-24GE provides 24 1000M and 100M combo SFP interfaces, that is, it supports
1000BASE-X and 100BASE-X modes. It features the function of layer-2/3 switching with the
1000M wire speed. The SFP ports support short-wave (850nm, multi-mode) and long-wave
(1310nm, single-mode) and long-wave (1550nm) 1000M/100M SFP optical modules and
SFP copper ports. The module is hot swappable.
2. LEDs
The 7200-24GE provides various system LEDs, as described in the following table:
Table 1-18 LEDs on the Front Panel
Sign
Status
7200-48P
10/100/1000BASE-T: 100m (Category-5 UPT)
1000BASE-SX(850nm)
1000BASE-SX(850nm)
1000BASE-LX(1310nm) 9/125um
1000BASE-LH(1310nm) 9/125um
Status, Link/ACT
Supported
<100W+15.4xN
(N indicates the PoE port being used, of which the value is less than 48.)
GB9254-1998 FCC Class A
GB4943-2001
141,824hrs
0 to 40°C
-40 to 70°C
10% to 90% RH
Net weight: 2.8 Kg
436*346*45mm ( L x W x H)
Description Detailed Information
OFF: The module has not been powered on.
Red: Module fault
System LED
Flashing green: The module is initializing.
Solid green: The module has finished initialization and can
perform switching normally.
62.5/125um MMF: 220m
50/125um MMF: 500m
SMF: 10KM
SMF: 40KM
1-25