Precaution For Fiber Connection; Requirements Of Installation Tools; Unpacking Inspection Requirements; Checking Goods - D-Link DES-7200 Hardware Installation Manual

DES-7200 Hardware Installation Guide
3. Keep the equipment away from high-power radio transmitter, radar transmitting station,
and high-frequency large-current device.
4. Measures must be taken to isolate static electricity.
2.3.5

Precaution for Fiber Connection

Before you connect the fibers, verify that the optical connector type and fiber type match the
optical interface type used, and pay attention to the Tx and Rx directions of the fiber. The Tx
end of this equipment should be connected to the Rx end of the opposite equipment, and the
Rx end of this equipment to the Tx end of the opposite equipment.
2.4

Requirements of Installation Tools

Table 2-4 List of Installation Tools
Common tools
Special-purpose tools
Meter
2.5 Unpacking Inspection
Requirements
2.5.1

Checking Goods

1. DES-7210/7206 chassis carton

Whether various panels of the equipment have been installed and adjusted properly

Documentation
2. DES-7210/7206 accessories carton

Whether the power module of the equipment is the required AC or DC module

Fan tray

Antistatic hand ring

Screwdriver

Power cable (for AC power configuration only)

Documentation
3. Module carton
It contains the modules, packing list and documentation of the DES-7210/7206.
Note
Cross screwdriver, straight screwdriver, related electric and optical
cables
Bolts, diagonal pliers, straps
Anti-static tool
Multimeter
The above lists the items of a normal delivery, which may differ from the
actual delivery. All depend on the purchasing contract. Please check your
goods carefully against the packing list or purchasing contract. If you have
any questions or there are any errors, please contact your distributor.
2-9