Electrical Safety - D-Link DES-7200 Hardware Installation Manual

Figure 2-1 Schematic Diagram for Correctly Moving the DES-7210
Figure 2-2 Schematic Diagram for Correctly Moving the DES-7206
Warning
2.1.3

Electrical Safety


Please observe local regulations and specifications when performing electrical
operations. Relevant operators must be qualified.

Please carefully check for any potential danger in the working area, for example,
ungrounded power supply, unreliable grounding of the power supply, and damp/wet
ground or floor.

Find out the location of the emergency power supply switch in the room before
installation. First cut off the power supply in the case of an accident.
2-2
Do not move the equipment by grasping the panel, power supply handle,
ventilation holes of the chassis, as they are not designed to bear the
weight of the entire equipment. Failing to do so may cause damage or
even injure yourself.
DES-7200 Hardware Installation Guide