7200-24G Module - D-Link DES-7200 Hardware Installation Manual

Product Model
LED
Hot swap ability
Management
redundancy
Power consumption
EMC
Safety regulation
MTBF
Operating
temperature
Storage
temperature
Operating humidity
Weight
Dimensions
1.6.2

7200-24G Module

Figure 1-9 shows the basic appearance of the 7200-24G, which is the line card module of
the DES-7210/7206. 7200-24G provides 12 1000M SFP ports and 12 1000M
optical-electrical multiplexing ports, and supports up to 24 1000BASE-X interfaces or 12+M
1000BASE-X interfaces and N 1000BASE-T interfaces, where M plus N equals 12. It
features the function of layer-2/3 wire speed switching. The 7200-24G module supports the
hot swap function and also supports hot swapping of SFP ports.
Figure 1-9 Basic Appearance of the 7200-24G
1. Interface
7200-24G provides 12 1000M SFP ports and 12 1000M optical-electrical multiplexing ports.
It features the function of layer-2/3 switching with the 1000M wire speed. When the function
of automatic negotiation is enabled, the 1000M electrical interface supports automatic
MDI/MDI-X identification. The SFP ports support short-wave (850nm, multi-mode) and
long-wave (1310nm, single-mode) 1000M SFP optical modules and long-wave (1550nm)
1000M SFP optical modules and SFP copper ports, thus facilitating configuration for users.
In addition, the SFP port supports hot swappability of the SFP module.
Note
2. LEDs
The 7200-24G provides various system LEDs, as described in the following table:
1-14
7200-CM1
Status, Primary, Alarm and 10/100M MGMT
Port LED
Supported
Supported
<30W
GB9254-1998 FCC Class A
GB4943-2001
246,987hrs
0 to 40°C
-40 to 70°C
10% - 90% RH
Net weight: 2.8 Kg
436*346×30 ( Lx W x Hmm)
The 7200-24G provides twelve SFP optical ports of 10/100/1000BASE-T
ports that are in the combo form. In other words, each SFP port
corresponds to one 10/100/1000BASE-T port, and only one port can be
used at a time, with the other being unavailable. The MDI/MDI-X automatic
identification of the 10/100/1000M electrical ports takes effect only when
auto negotiation is enabled.
DES-7200 Hardware Installation Guide
7200-CM2 7200-CM3
<50W
240,558hrs 174,420hrs
7200-CM4
173,868hrs