Adjust Rear Deflector; Adjust Side Deflectors - MacDon R85 Unloading And Assembly Instructions

Rotary disc 13 foot pull-type mower conditioner

Hide thumbs Also See for R85:

Table of Contents

Lift aft end of forming shield so that side

deflectors clear float springs, and tighten all

bolts.

C. ADJUST REAR DEFLECTOR

a. Loosen handles (H) until rear deflector (J) can

be moved up or down.

b. Position deflector at mid-position, and tighten

handles (H).

169561

UNLOADING AND ASSEMBLY

D. ADJUST SIDE DEFLECTORS

a. Remove bolt and nut (A), and discard. Repeat at

b. Retrieve hardware as supplied, and install

c. Position side deflectors (F) at mid-point, and

opposite side of cover.

1/2 in. x 1.75 long carriage bolt (B) from

underneath, washers (C), rubber washer (D), and

handle (E) as shown at two (2) places.

tighten handles (E).

Revision C

Table of Contents