Step 17. Attach Electrical Connector - MacDon R85 Unloading And Assembly Instructions
Rotary disc 13 foot pull-type mower conditioner
Hide thumbs
Also See for R85:
- Operator's manual (220 pages) ,
- Assembly instructions manual (122 pages) ,
- Installation instructions manual (42 pages)
Table of Contents
Advertisement
STEP 17. ATTACH ELECTRICAL
CONNECTOR
C
B
a. Check that Pin #4 (A) in the tractor receptacle
is not constantly energized - see your tractor
operator's manual, and remove the appropriate
fuse if required.
IMPORTANT
Older model tractors will have Pin #4 (A)
energized as an accessory circuit. The
R85 mower conditioner uses this pin
position (B) for brake lights.
b. Connect the mower conditioner wiring harness
connector (C) to tractor.
designed to fit tractors equipped with a round
7-pin receptacle (SAE J560).
169561
UNLOADING AND ASSEMBLY
A
C
The connector is
29
Revision C
Advertisement
Table of Contents
