HP MSM720 Installation Manual page 12

2. Hold the controller with attached brackets up to the rack and move it vertically until the rack
holes line up with the bracket holes, and then insert and tighten the four number 12-24 screws
holding the brackets to the rack.
Figure 6 Mounting in a rack
Wall installation
WARNING!
down.
CAUTION:
(1/2 inch) plywood or its equivalent.
1. Use a #1 Phillips (cross-head) screwdriver to attach the mounting brackets to the controller
with the included 8 mm M4 screws.
12 Installing the controller
The network ports must be facing up. Do not install the controller with ports facing
The controller must be mounted on a wall or wood surface that is at least 12.7 mm