Coway APM-1010DH Instructions Manual page 9

Indication part / Operation part
Air purification,
1
humidification indicators
Power Button
current/Selected humidity indicator
3
Humidity button
Air purification, humidification indicators
1
- When only the air purification indicator is
on : Since the water tank is empty, only the air
purification function is performed.
- When both the air purification and
humidification indicators are on : The
water tank is filled with water and both the
humidification and air purification functions
are performed.
* If the water tank is not installed or not properly
installed, the operation mode indicator blinks.
mode button
1
Using the mode button, you can select the
operating mode in 3 steps in the following
order: Auto → Silent → Dust.
Airflow speed button
2
Using the airflow speed button, you can set the
airflow speed in 4 steps in the following order:
Step 1 → Step 2 → Step 3 → Turbo (If you press
the airflow speed button during an operating
mode, it switches to manual mode immediately).
Indication Part
mode indicator
1 2
mode button
Off-timer indicator
4
Off-timer button
Humidity button
3
Using the Humidity button, you can set the
humidity level in the following order: 40% →
50% → 60% → Continuous operation (The
configured humidity is only applied in Auto
mode).
Off-timer button
4
Pressing the Off-timer button changes the
indicator in the following order: "1hr → 4hr →
8hr". If the off-timer is cancelled, all the indicator
lamps are turned off.
Air quality indicator
5
Operation Part
Airflow indicator
Airflow speed button
Light sensor
Represents the pollution level by
the color of the indicator.
Clean: Blue
Low pollution level: Bright violet
Medium pollution level: Dark violet
High pollution level: Red
7
8