Coway APM-1010DH Instructions Manual page 21

- Always unplug the unit before cleaning the filters.
- The Pre-filter is reusable by removing dust or cleaning it with water.
- If the Pre-filter is not cleaned for a long time, the product performance may
deteriorate.
Tips
- The Custom, Deodorization, and ANTI-FLU™ filters cannot be reused even when
cleaned.
- Do not clean them with water.
Cleaning Pre-filter (every 2 - 4 weeks)
1 Open the front cover by pulling the bottom part of the cover where
the air inlet is located.
2 Remove the pre-filter by pushing the filter catches.
3
Clean the filter with a vacuum cleaner or with water depending on
the level of contamination.
4
Install the pre-filter after completely removing any moisture.
Fit the front cover back onto the product.
-
When installing the pre-filter, make sure that you hook the
catches properly.
19
20