Coway APM-1010DH Instructions Manual page 18

cLEANINg mETHOD
Cleaning the water tank (daily)
1
Separate the water tank from the side of the product and open the water tank cap at the bottom of the
water tank by turning it counterclockwise. If there is any residual water in the water tank, empty the water
tank before cleaning it.
2 Separate the anti-scale filter from the water tank cap.
Add water and a small amount of neutral detergent into the water tank until approximately 1/3 of the
water tank is filled and close the cap by turning it clockwise. Shake the water tank holding it with both
hands as shown by the figure, so that all sides of the water tank can be washed.
- Since the water tank is large, you can clean it by putting your hand into the water tank.
- Do not add a neutral detergent into the water tank when the anti-scale filter is installed. This will
degrade the product performance.
3 Open the water tank cap by turning it counterclockwise and clean it
under flowing water.
Wash the anti-scale filter under flowing water and install it into the
water tank cap.
-
Avoid external impacts to the water tank. A strong impact may
damage the water tank. This may result in water leakage.
-
When closing the cap, fasten it firmly in the direction of CLOSE
(clockwise) until you hear a popping sound.
-
If the cap is not completely fastened, it may result in a water leakage.
▶
Neutral
+
detergent