Coway APM-1010DH Instructions Manual page 12

PREPARATIONS
Humidification filter
1
Separate the water tank.
2 Separate the water tray as shown by the figure.
3 Install the humidification filter for which the plastic packaging has
been removed.
- Install the filter so that the thin filter faces the front and the thick
filter faces the back.
- Although the humidification filter has a front and a back, it does
not have a top and a bottom.
4 Install the water tray and the water tank in this order.
- The amount of moisture supplied by the humidification filter may decrease as it is contaminated by
scale. Clean the filter at least once a week (see p.17).
- If you do not want to use the humidification function, remove the humidification filter, dry it
completely in the shade and store it in a separate location.
- If the water tank or the water tray is not properly installed, the product will not work.
Front
Rear